中小企业板IPO抑价现象及缘由实证研究

回顾了近年来有关IPO抑价的主要理论.并且运用均值检验及回归分析等方法对我国中小企业板的IPO抑价现象进行了实证分析.通过分析发现,我国中小企业板IPO存在着非常严重的抑价现象.此类现象可用投机-泡沫等假说进行解释.研究结果表明:目前我国的IPO的首日收益率仍处于较高的水平,询价过程缺乏信息披露是影响询价制度有效实施的主要原因.IPO的询价发行制度仍需进一步完善.     

基于聚酰亚胺基底的细胞电融合芯片的研制

基于柔性印刷电路板(flexible printed circuits board, FPCB)技术,通过在聚酰亚胺基底薄膜表面层压的铜箔上刻蚀微电极阵列结构制备了一种细胞电融合芯片.在低电压(≤40 V)条件下实现了细胞电融合,融合效率达37%,远高于聚乙二醇(polyethylene glycol, PEG)法及传统细胞电融合方法.与传统细胞电融合系统相比,此芯片可在低电压条件下工作,具有结构简单、成本低廉、实验过程可观察、融合通量高等优点.另外,聚酰亚胺薄膜基底良好的柔软度可保证此芯片与其它分析模块(如细胞筛选分离模块)的有效集成,具备构造微全分析系统(micro total analytical system, μ-TAS)的巨大潜力.     

A Microbial Sensor Based on Direct Electron Transfer at Shewanella Sp. Drop‐Coated Screen‐Printed Carbon Electrodes

Aerobically grown Shewanella sp. bacterial suspension drop‐coated on a disposable screen‐printed carbon electrode was found to possess electroactivity without the aid of redox mediator. Cyclic voltammetric studies revealed the characteristics of a mixed diffusion adsorption‐controlled electrochemical process for direct electron transfer at the bacteria‐modified electrode. Both FE‐SEM and ATR FT‐IR experiments were carried out to investigate the surface characteristics. The electroanalytical applicability was further demonstrated for electrocatalytic reduction of arsenite, hydrogen peroxide and nitrite. Low cost and very simple manufacturing procedure allow for the proposed bacterial sensor to be applied as disposable devices.     

Formaldehyde interaction with adsorbed oxygen on open-circuit platinum electrodes in aqueous sulfuric acid solutions

The open circuit potential transients and cathodic potentiodynamic pulses were measured upon formaldehyde (methylene glycol) interaction with pre-adsorbed oxygen (O_ads) on Pt/Pt and pc Pt electrodes in aqueous sulfuric acid solutions. The slowest interaction of CH₂(OH)₂ with O_ads was observed in the high coverage range of the electrode surface (θ_O ～ 0.2 0.8 to 1). The process rate in this range is determined by the direct reaction of O_ads with CH₂(OH)₂ molecules from the bulk solution. In the middle surface oxygen coverage range (θ_O 0.2 to 0.8), CH₂(OH)₂ interaction with O_ads takes place by the mechanism of “conjugated reactions”. The kinetic parameters of reactions for CH₂(OH)₂, HCOOH, and CH₃ OH were compared. The rate of CH₂(OH)₂-O_ads interaction on Pt electrodes in the high oxygen coverage range was found higher by an order of magnitude than that of HCOOH and by two orders of magnitude than in the case of CH₃OH.     

Electrochemical Determination of Dextromethorphan on Reduced Graphene Oxide Modified Screen‐Printed Electrode after Electromembrane Extraction

In this paper, electromembrane extraction coupled with differential pulse voltammetry (DPV) on a reduced graphene oxide modified screen‐printed carbon electrode (RGO‐SPCE) for the determination of dextromethorphan (DXM) in urine and plasma has been described. DXM migrated from 4 mL of a donor phase across a thin layer of 2‐nitrophenyl octyl ether (NPOE) immobilized in the pores of a porous hollow fiber, into a 20 µL acceptor phase (HCl) present inside the lumen of the fiber. Then, 15 µL of a 0.1 M NaOH solution was added to the acceptor phase and the mixture was analyzed using DPV.     

Multiplexed Determination of Amino‐Terminal Pro‐B‐Type Natriuretic Peptide and C‐Reactive Protein Cardiac Biomarkers in Human Serum at a Disposable Electrochemical Magnetoimmunosensor

A rapid magnetoimmunosensor for the simultaneous determination of two cardiac biomarkers, amino‐terminal pro‐B‐type natriuretic peptide (NT‐proBNP) and C‐reactive protein (CRP), in human serum is described. Specific capture antibodies were covalently immobilized onto carboxylic acid‐modified magnetic beads. The quantification of NT‐proBNP and CRP was performed by using indirect competitive and sandwich configurations, respectively, and horseradish peroxidase‐labeled tracers. The use of dual screen‐printed carbon electrodes allowed the achievement of simultaneous independent amperometric readout for each cardiac biomarker. The developed methodology showed very low limits of detection (0.47 ng mL^?1). An international standard for CRP serum spiked with NT‐proBNP was analyzed to evaluate the usefulness of the magnetoimmunosensor.     

Quantitative Detection for Porphyromonas gingivalis in Tooth Pocket and Saliva by Portable Electrochemical DNA Sensor Linked with PCR

Here, a quantitative electrochemical analysis of periodontal bacteria in gingival crevicular fluid (GCF) and saliva by direct polymerase chain reaction (PCR) is presented. The electrochemical measurement was performed by mixing with PCR products and electrochemical indicator (bisbenzimidazole trihydrochloride). The peak current of indicator is reduced due to slower diffusion when the dye intercalates into the amplified DNA, and the degree of reduction in the peak current is correlates with the quantity of amplified DNA. Therefore, a quantitative analysis is possible by using our electrochemical method at the end point of PCR. In the GCF testing, The number of Porphyromonas gingivalis (Pg) detected by our electrochemical method at the end point of PCR were almost same compared with that were calculated by the conventional method of quantitative real? time PCR. In the saliva testing, the relationship between number of Pg in saliva and average pocket depth, and age‐dependence were also clearly observed. Since the saliva sample is obtained in a non‐invasive manner, this method is useful for the primary screening of periodontal disease. Moreover, our detection method is simple and uses a hand‐held potentiostat making it suitable for development of an on‐site periodontal diagnosis system.     

Voltammetric Determination of Pb(II) and Cd(II) Ions in Well Water Using a Sputtered Bismuth Screen‐Printed Electrode

A method using commercially available sputtered bismuth screen‐printed electrodes (Bi_spSPE), as substitute to mercury electrodes, for the determination of trace Pb(II) and Cd(II) ions in drinking well water samples collected in a contaminated area in The Republic of El Salvador by means of differential pulse anodic stripping voltammetry (DPASV) has been proposed. The comparable detection and quantification limits obtained for both Bi_spSPE and hanging mercury drop electrode (HMDE), together with the similar results with a high reproducibility obtained in these water samples analyses recommend the applicability of Bi_spSPE for the determination of low level of metal concentrations in natural samples.     

Stripping Analysis of As(III) by Means of Screen‐Printed Electrodes Modified with Gold Nanoparticles and Carbon Black Nanocomposite

A novel sensor based on carbon black‐gold nanoparticle nanocomposite modified screen‐printed electrode (CB‐AuNPs/SPE) for the detection of As(III) has been developed. The sensor was prepared modifying the SPE with CB and AuNPs by a drop casting automatable deposition. The As(III) was detected by CB‐AuNPs/SPE using anodic stripping voltammetry, with a high sensitivity (673±6 µA µM^?1 cm^?2) and reaching a LOD of 0.4 ppb. Finally, CB‐AuNPs/SPE has been applied to As(III) trace analysis in drinking water, obtaining satisfactory recovery values (99±9 %).     

Evaluation of the piezoelectric behaviour produced by a thick-film transducer using digital speckle pattern interferometry

This paper presents an interferometric measurement of the out-of-plane deflections produced by a piezoelectric transducer, manufactured by thick-film deposition of a ceramic paste over an alumina substrate, when is subjected to a DC electric voltage. It is shown that a digital speckle pattern interferometer with an incorporated phase-shifting facility allows the measurement of nanometer displacements generated by the piezoelectric device. These measurements are used to evaluate the effective piezoelectric charge constant along the polarization direction (d₃₃)_eff that characterizes the thick-film transducer.